If this acceleration and r.e.t.a.r.dation actually occurs, waves which did not interfere on meeting before the disks moved, will interfere now; for one will arrive at the common goal half a length behind the other.
Now a gradual change of bright s.p.a.ce to dark, and vice versa, shows itself, to an observer looking at the bands, as a gradual change of position of the bright stripes, or a shift of the bands. A shift of the bands, and especially of the middle white band, which is much more stable than the others, is what we look for. The middle band is, or should be, free from the "concertina"-like motion which is liable to infect the others.
At first I saw plenty of shift. In the first experiment the bands sailed across the field as the disks got up speed until the crosswire had traversed a band and a half. The conditions were such that had the ether whirled at the full speed of the disks I should have seen a shift of three bands. It looked very much as if the light was helped along at half the speed of the moving matter, just as it is inside water.
On stopping the disks the bands returned to their old position. On starting them again in the opposite direction, the bands ought to have shifted the other way too, if the effect was genuine; but they did not; they went the same way as before.
The shift was therefore wholly spurious; it was caused by the centrifugal force of the blast of air thrown off from the moving disks. The mirrors and frame had to be protected from this. Many other small changes had to be made, and gradually the spurious shifts have been reduced and reduced, largely by the skill and patience of my a.s.sistant, Mr. Benjamin Davies, until presently there was barely a trace of them.
But the experiment is not an easy one. Not only does the blast exert pressure, but at high speeds the churning of the air makes it quite hot. Moreover, the tremor of the whirling machine, in which from four to nine horse-power is sometimes being expended, is but too liable to communicate itself to the optical part of the apparatus. Of course elaborate precautions are taken against this. Although the two parts, the mechanical and the optical, are so close together, their supports are entirely independent. But they have to rest on the same earth, and hence communicated tremors are not absent. They are the cause of most of the slight residual trouble.
The whole experiment is described in fairly full detail in the _Philosophical Transactions of the Royal Society_ for 1893 and 1897.
And there also are described some further modifications whereby the whirling disks are electrified--likewise without optical effect, and are also magnetised; or rather a great iron ma.s.s, strongly magnetised by a current, is used to replace the steel disks.
The effect was always zero, however, when spurious results were eliminated; and it is clear that at no practicable speed does either electrification or magnetisation confer upon matter any appreciable viscous grip upon the ether. Atoms _must_ be able to throw it into vibration, if they are oscillating or revolving at sufficient speed; otherwise they would not emit light or any kind of radiation; but in no case do they appear to drag it along, or to meet with resistance in any uniform motion through it. Only their acceleration is effectual.
In the light of Larmor's electron theory, we know now that acceleration of atoms, or rather of a charge upon an atom, necessarily generates radiation, proportional in amount to the _square_ of the acceleration--whether that be tangential or normal. There is no theoretical reason for a.s.suming any influence on uniform velocity. And even the influence on acceleration is exceedingly small under ordinary circ.u.mstances. Only during the violence of collision are ether waves freely excited. The present experiment, however, has nothing to do with acceleration: it is a test of viscosity. An acceleration term exists in motion through even a perfect fluid.
[Ill.u.s.tration: FIG. 12. General view of whirling part of Ether machine, with pair of steel disks, and motor. _To face page 72._]
[Ill.u.s.tration: FIG. 13. General view of optical framework--sustaining mirrors, telescope, and collimator--to surround the disks of the Ether machine. Compare fig. 11. _To face page 73_.]
The conclusion at which I arrived in 1892 and 1893 is thus expressed (p. 777 of vol. 184 _Philosophical Transactions of the Royal Society_): "I feel confident either that the ether between the disks is quite unaffected by their motion, or, if affected at all, by something less than the thousandth part. At the same time, so far as rigorous proof is concerned, I should prefer to a.s.sert that _the velocity of light between two steel plates moving together in their own plane an inch apart is not increased or diminished by so much as the 1/200th part of their velocity_."
That was the conclusion in 1893; but since then observations have been continued, and it is now quite safe to change the 1/200th into 1/1000th. The spin was sometimes continued for three hours to see if an effect developed with time; and many other precautions were taken, as briefly narrated in the _Philosophical Transactions_ for 1897.
The following ill.u.s.trations give an idea of the apparatus employed.
Fig. 12 shows a photograph of the whirling machine before being bolted down to its stone pier; with the pair of disks at top ready to be whirled by an armature on the shaft, which is supplied with a current sometimes of nine horse-power. The armature winding was of low resistance, and was specially braced, so as to give high speed without flying out, and without generating too much back-E M F. The ampere-meter and volt-meter and the carbon rheostat (in armature circuit), for regulating the speed, are plainly seen. The smooth pulley on the shaft is for applying a brake. The small disk above it is perforated to act as a siren for estimation of speed; but other arrangements for this purpose were subsequently added. The two large disks at top were of the best circular-saw steel; they are somewhat thicker at middle than at edge, and are strongly bolted up between iron cheeks, which are attached to the shaft. The lower end of the shaft is a step-bearing of hardened steel in a vessel of oil. The upper collar is elastic, so as to allow for a steadying teetotum action at high speeds.
Fig. 13 is a photograph of the optical square, which was ultimately to be placed in position surrounding the disks. The slit and collimator are shown; the micrometer end of the observing telescope is out of the picture.
The mirrors on the sides of the square are accurately plane; they are adjustable on geometric principles, and are pressed against their bearings by strong spiral springs. They were made by Hilger.
A drawing of the arrangement is given in Fig. 14, and here the double micrometer eye-piece is visible.
In Fig. 15 the whole apparatus is shown mounted. The whirling machine strongly bolted down to a stone pier independent of the floor; the optical frame independently supported by a gallows frame from other piers. The centrifugal mercury speed-indicator is visible in front, and Mr. Davies is regulating the speed. At the back is seen a boiler-plate screen for the observer with his eye at the telescope.
(See Frontispiece.)
[Ill.u.s.tration: _Lodge_ _Phil. Trans. 1893. A. Plate 31._ The mirror frame is pivoted on a vertical axis here Horizontal axis of frame Mode of mounting the semi-transparent mirror M so as to give alt.i.tude and azimuth movement to the reflected beam Details of bra.s.s plate supporting fourth mirror front, side and back views Back view shows the three slots in which the ends of the supporting screws rest giving a fine adjustment, the plate being supported by three rigid pushes and three elastic pulls.
FIG. 14 Plan of optical frame with steel disk in position, and glazed drum to isolate them from the frame. G represents one of the panes of optical gla.s.s. Supports of telescope and collimator also shewn, and part of the fixing of the four mirrors 1.2.3.4., three of them let into recesses in the wooden frame, each mirror held by a bra.s.s plate supported by three finely cut screws against which it is pressed by the spring-bolts shewn M is the semi-transparent mirror West, Newman lith FIG. 14.
_To face page 74._]
The expense of the apparatus was borne by my friend the late George Holt, shipowner, of Liverpool.
Fig. 16 exhibits something like the appearance seen in the eye-piece, with the interference bands on each side of the middle band, and with the micrometer wires set in position--each moved by an independent micrometer head. The straight vertical wire was usually set in the centre of the middle white band, and the =X= wire on the yellow of the first coloured band on one side or the other.
The method of observation now consists in setting a wire of the micrometer accurately in the centre of the middle band, while another wire is usually set on the first band to the left. Then the micrometer heads are read, and the setting repeated once or twice to see how closely and dependably they can be set in the same position. Then we begin to spin the disks, and when they are going at some high speed, measured by a siren note and in other ways, the micrometer wires are reset and read--reset several times and read each time. Then the disks are stopped and more readings are taken. Then their motion is reversed, the wires set and read again; and finally the motion is once more stopped and another set of readings taken. By this means the absolute shift of middle band, and its relative interpretation in terms of wave-length, are simultaneously obtained; for the distance from the one wire to the other, which is often two revolutions of a micrometer head, represents a whole wave-length shift.
In the best experiments I do still often see something like a fiftieth of a band shift; but it is caused by residual spurious causes, for it repeats itself with sufficient accuracy in the same direction when the disks are spun the other way round.
Of real reversible shift, due to motion of the ether, I see nothing. I do not believe the ether moves. It does not move at a five-hundredth part of the speed of the steel disks. Further experience confirms and strengthens this estimate, and my conclusion is that such things as circular saws, flywheels, railway trains, and all ordinary ma.s.ses of matter do not appreciably carry the ether with them. Their motion does not seem to disturb it in the least.
The presumption is that the same is true for the earth; but the earth is a big body,--it is conceivable that so great a ma.s.s may be able to act when a small ma.s.s would fail. I would not like to be too sure about the earth--at least not on a strictly experimental basis. What I do feel sure of is that if moving matter disturbs ether in its neighbourhood at all, it does so by some minute action, comparable in amount perhaps to gravitation, and possibly by means of the same property as that to which gravitation is due--not by anything that can fairly be likened to etherial viscosity. So far as experiment has gone, our conclusion is that the viscosity or fluid friction of the ether is zero. And that is an entirely reasonable conclusion.
[Ill.u.s.tration: FIG. 16. Approximate appearance of the interference bands and micrometer wires as seen in the eye-piece of the telescope of the Ether machine.]
[Ill.u.s.tration: FIG. 18. Appearance of the interference bands in the channel of the iron spheroid. They were reflected in the upper iron as shown.]
_To face page 76._
Oblate spheroid for Whirling Machine.
[Ill.u.s.tration: FIG. 17. Section of oblate spheroid of soft iron for whirling machine, showing arrangement for winding central core with wire so as to be able to magnetise it strongly while spinning inside the optical frame.]
_To face page 77._
MAGNETISATION.
For testing the effect of magnetism, an oblate spheroid was made of specially selected soft iron, 3 feet in diameter, weighing nearly a ton. Its section is shown in Fig. 17. It had an annular channel or groove, half an inch wide and 1 foot deep, round the bottom of which was wound a kilometre of insulated wire to a depth of 4 inches; the terminals of which were brought out to sliding contacts on the shaft, so that the whole could be very highly magnetised while it was spinning. Everything was arranged so as to be symmetrical about the central axis.
To the coil of wire, whose resistance was 30 ohms, 110 volts was ordinarily, and 220 volts exceptionally, applied. The magnetic field with 110 volts was about 1800 c.g.s., on the average, all over the main region through which the beam of light circulated.
This light-bearing s.p.a.ce, or gap in the magnetic circuit, was only half an inch wide; and accordingly in the eye-piece the iron surfaces could be seen, above and below, as well as the interference bands in the luminous gap. The whole appearance is depicted in Fig. 18.
ELECTRIFICATION.
For the electrification experiment, a third and insulated disk was clamped between the two steel disks and kept electrified to sparking tension. The arrangement is shown diagrammatically on a smaller scale in Fig. 19.
[Ill.u.s.tration: FIG. 19. Arrangement for electrifying a third or middle steel disk to sparking potential while spinning.]
The electrification test was exceptionally easy to apply, by connecting the insulated charging pin to a Voss machine in action: because when the disks were spinning and the bands in good condition, the electrification could be instantaneously applied, taken off, reversed, or whatever was desired; and the effect of the sudden lowering of potential by sparks pa.s.sing between the revolving plates could be exactly looked for.
The conclusion of my second _Philosophical Transactions_ paper--that of 1897--is that _neither an electric nor a magnetic transverse field confers viscosity upon the ether, nor enables moving matter to grip and move it rotationally_.
QUESTION OF A POSSIBLE LONGITUDINAL MAGNETIC DRIFT.
Later I tried a longitudinal magnetic field also; arranging a series of four large electric bobbins or long coils along the sides of a square inscribed at 45 in the optical square, Figs. 11 and 13; so that the light went along their axes.
The details of this experiment have been only partially recorded, but the salient points are to be found stated in the _Philosophical Magazine_ for April, 1907, pages 495-500.
The result was again negative; that is to say, a magnetic field causes no perceptible acceleration in a beam of light sent along the lines of force. The extra velocity that could have been observed would have been 1/9th of a millimetre per second, or 16 miles per hour, for each C.G.S. unit of field intensity.