71,997.--MAIL-BAG FASTENER.--S. Denison, Portlandville, N.Y.
I claim the hooks, C, constructed substantially as herein shown and described, in combination with the straps, D and F, with the bag, B, and staples, A, as and for the purpose set forth.
71,998.--SAWBUCK.--Henry J. Dill, c.u.mmington, Ma.s.s.
I claim the clamps, D, the treadle, E', the arms, E, springs, F', and rods, F, constructed, arranged, and operating, in combination with the stationary part, A, substantially as shown and described for the purpose set forth.
71,999.--CARRIAGE FOR ROCK DRILL.--Thomas Doane, Boston, Ma.s.s. I claim the arrangement of the round bars, E F G and H, of a rock drill carriage into a frame, for the reception of rock drilling machines which shall be able to reach therefrom any point where it is desirable to bore a hole, substantially as and for the purpose described.
2d, The position of the horizontal round bars, E and F, under an acute (more or less) angle, d, to the side frame of a rock drill carriage, or to the alignment of the tunnel, substantially as and for the purpose set forth.
3d, The construction of a rock drill carriage for driving a tunnel or mine so as to swing in a vertical direction on the forward wheels and axle, substantially as and for the purpose specified.
72,000.--RAILWAY CHAIR.--John H. Downing, Salem, Ma.s.s.
I claim the single-headed chair, A, in combination with a sectional railroad rail, arranged as and for the purpose shown and described.
72,001.--ROTARY PUMP.--John Doyle, Hoboken, N. J., and Timothy A.
Martin, New York city.
We claim the two drums, A C, placed concentrically one within the other, the chamber, D, air pa.s.sages, E E', valves, F G, and tubular journals, B B', all arranged and combined to operate in connection with water or other liquid placed in the s.p.a.ce or s.p.a.ces between the two drums, A C, substantially in the manner as and for the purpose specified.
72,002.--GRINDING MILL.--James F. Drummond, New York city.
I claim the tubular inlet-journal, b, having its interior contracted around the feed pipe at one point, and thence flaring toward the cylinder and the blast pipe, substantially as and for the purpose specified.
72,003.--PIVOT GEARING.--Joseph J. d.u.c.h.esne, Lacon, Ill.
I claim the circular bed plate, A, in combination with the pinion plate, B, and coupling plate, C, secured by the set screw, S, the whole arranged and operating substantially as and for the purposes set forth.
72,004.--CULTIVATOR.--William Duffner, Petersburg, Ind.
I claim the cultivator composed of the elements, A B B' C D E F H I J N, and the device for regulating the depth of the shovels, composed of the elements, G K L M P, constructed and arranged as set forth.
72,005.--WOVEN FABRIC.--J. Renshaw, East Greenwhich, R.I.
I claim the fabric, herein described, as a new article of manufacture.
72,006.--HORSE RAKE.--Edward A. Field, Sidney, Me.
I claim, 1st, The application of each tooth, E, to its arm, D, by means of a round tenon arranged at an obtuse angle with the axis of the tooth, and going into the arm, the same being substantially as and for the purpose described.
2d, Also, the combination as well as the arrangement of the adjustable brace d, and the staple or clasping wire, f, with the arm and the tooth, when applid by means substantially as specified, viz., a cylindrical tenon arranged at an obtuse angle with the axis of the tooth, and going into a corresponding hole made in the arm.
3d, Also, the combination of the damping screw, h, with the arm, and the tooth applied to such arm by a tenon arranged at an obtuse angle with the axis of the tooth as specified.
4th, Also, the arrangement of the rope, or its equivalent, with the several arms and their teeth, and the braces thereof, the said rope being to operate as and for the purpose specified.
72,007.--PUNCH FOR FORMING CLASP.--Charles D. Flesche, New York city.
I claim the sliding punch, B, in combination with the plates, A A', cutters, b b, an spring, e, substantially as and for the purpose herein shown and described.
72,008.--SELF-FASTENING SPRING FOR WEBBING.--John Flinn, Philadelphia, Pa., a.s.signor to Archer Steel, same place.
I claim a spiral spring, for webbing, having the wire at one end of the spiral coils, A A, bent in the manner described and shown by B C D E, for the purpose specified.
72,009.--CARVING KNIFE AND FORK HOLDER.--Alden T. Foster, Albany, N.Y.
I claim, as an article of manufacture, the dish or stand, A, constructed substantially as described, with notches, a a and c c, as and for the purpose set forth.
72,010.--LAMP CHIMNEY.--Sam'l W. Fowler, Brooklyn, N.Y.
I claim the construction of the gla.s.s chimney, with its concave and convex deflectors, J and E, on each side, and collar, B, beneath, with its projections, C C, as herein described and for the purposes set forth.
72,011.--CARTRIDGE BOX.--William Freeborn, Tivoli, N.Y.
I claim the square box, A, made of leather or any suitable material, when constructed with a series of round, fluted, or ruffled holders, B, on the inside, made of any firm or flexible material, a series of holders, B, being attached to each flap, C, in front, and the flaps b.u.t.toning to the sides of the box, A, as herein described and for the purpose set forth.
72,012.--DEVICE FOR HITCHING HORSES.--Samuel Galbraith, New Orleans, La.
I claim the device above described, consisting of the rings, A and B, and the pivoted curved jaws, C C, meeting at one extremity at e' e', and connected at the other by means of the rods, r r, and springs, s, working in the tube, substantially as and for the purpose specified.
72,013.--CAPPING SCREWS.--J. Gardner, New Haven, Conn.
I claim, 1st, Cutting away or depressing the cap at the point where it meets the nick in the screw head, substantially as described, so that such cut away or depressed portion, while connected with and forming part of the cap shall lie within outline the nick in the screw head, as set forth.
2d, A capped screw in which the slot or depression in the cap corresponding to the nick in the screw head is forced, substantially in the manner and for the purposes herein shown and described.
72,014.--TIGHT AND LOOSE PULLEY.--Joseph P. Gates, Lincoln, Ill.
I claim the construction of the pulley, e, in two sections, with the arrangement and combination of the ram spring, F, the rebound guard, G, the stop f.l.a.n.g.e, I, the case dog, J, and spring, K, the case dog ram, L, the shuttle key, P, and stands, Z, and arm, b, with cam, a, when constructed, arranged, and operated as herein described and for the purposes set forth.