Chapter 505 Production Line
The next day, Zhao Xinyi officially started to work. After Jiang Xiaobai got up, he drove back to Daxing Glass Factory.
The entire Daxing Glass Factory has almost become a large construction site. The simple workshop has been built long ago, and the equipment has been installed in the factory, but there are follow-up projects to be completed.
In addition, a new warehouse will be built. If the project is completed, it may have to wait until October.
The gate of the factory was wide open. Jiang Xiaobai drove in directly, but he still saw it outside the door. Soon news of Jiang Xiaobai's return spread.
Jiang Xiaobai does not mention the most admired and beloved director in the history of Daxing Glass Factory, but he is definitely the most prestigious director.
"Director Jiang is back." Jin Guoyan soon appeared in front of Jiang Xiaobai wearing a helmet.
During this time, he has been staying in the workshop and factory.
"Thanks, how are you doing now?" Jiang Xiaobai asked as he got out of the car and walked to the workshop.
"The progress is very fast. The installation and commissioning of the equipment will definitely be completed in early September, but the workers are still lacking in learning production and operation. It is not realistic to produce if the equipment is installed.
Jin Guoyan waited for Jiang Xiaobai and walked into the production workshop. The steel pipes on the ground were all messed up, so he had to lift his feet and walk in.
"This ground is too messy, I will let people clean up when I turn around." Jin Guoyan said.
"It's okay, just clean up a little bit, just don't get into trouble." Jiang Xiaobai didn't care too much.
As soon as I walked into the workshop, I saw a bunch of people installing equipment, and a few engineers wearing white hard hats were directing workers to install it.
At the same time, the workers of Daxing Glass Factory were studying behind him.
"It really doesn't work, so let the engineer stay for a while. After the equipment is installed and debugged, he will give the workers a lesson and get started." Jiang Xiaobai said.
"Well, I have communicated with the engineers, but they can't be the master. They still need to communicate with Luo Bo." Jin Guoyan said.
"It's okay, I'll call back, and the production of tempered glass, I have to get it over." Jiang Xiaobai said.
"Yes, but the manager, the toughened glass production technology, it is estimated that the asking price of Luobo Glass will not be low." Jin Guoyan was a little worried.
"Now the bank is still asking for the preparation of the loan for our factory, and the procedure has not been started yet. I don't know when the money will come down."
Jiang Xiaobai kept walking, and said casually: "If you can't, you owe it first, and if you can, you can drag it."
He also knows that expecting bank loans is a bit unreliable. He doesn't know when he will be able to come down, and he is ready to run away at the end of the year.
Anyway, they are collective assets. If the meat is rotten, there is no big deal in the pot.
First, make the foundation of Daxing Glass Factory solid.
Anyway, I don't run twice at the end of the year, just get used to it.
"Okay." Jin Guoyan gritted his teeth and responded. If you owe debts, you should owe them.
"Manager Jiang."
"Director Jiang." Xu Weiping and Du Yonghong saw Jiang Xiaobai and surrounded them.
"Thanks." Jiang Xiaobai said, looking at the oil stains on their clothes.
"It's okay, I'm afraid that the progress of the project will be delayed," Xu Weiping shook his head.
A few people here were chatting, and Luo Bo's engineer also came over.
"Manager Jiang,"
"Liu Gong. Zhang Gong." Jiang Xiaobai smiled and shook hands with several people.
"How is it?" Jiang Xiaobai asked.
"The melting furnace has been completed. The melting furnace is the first step in the production of float glass. This is the same as the original ordinary flat glass. The furnace charging machine is automatically put into the furnace, and the heavy oil is atomized and heated by the nozzle. The air is mixed and burned. The heat of the high-temperature flame is generated, and the raw materials are melted through the molten pool to obtain molten glass..."
"Here is the tin bath. The tin bath is the key equipment for float glass production. The tin bath is made of refractory materials. The outer shell is provided with a steel structure. The entire tin bath is supported by the lower supporting steel structure. The supporting structure is unique in design. Avoid the influence of fans and other mechanical vibrations to ensure that the tin level is level."
The engineer gave Jiang Xiaobai a general introduction to this set of production equipment, and Jiang Xiaobai didn't understand it after he had designed it with professional knowledge.
I can only listen to it roughly.
"The tin bath is filled with tin liquid, totaling 160,000 kg. The molten glass in the melting furnace enters the tin bath through the launder, and floats on the absolutely horizontal tin surface, and forms a flat glass ribbon after cooling. In order to control the thickness of the glass, Both sides of the tin bath are equipped with edge-drawing machines, glass thickness monitoring equipment and instruments, cameras, etc."
"Here is an annealing furnace under construction. The glass strip from the tin bath enters the annealing furnace for annealing treatment. The main function is to relieve stress and improve the quality of the glass."
"What has not been built is the finished product processing line. The annealed glass strip continuously enters the finished product processing line, and is washed, dried, scanned, inspected, longitudinally cut, cross-cut, broken, trimmed, and divided into different sizes. The slices are then automatically fetched, lined, stacked, and packaged by the fetching device. The cut burrs and unqualified glass are broken and sent to the broken glass system through a belt conveyor..."
"After the construction of the finished product processing line is completed, the entire float glass production line is probably completed. It is expected that there will be no problems in early September," said Engineer Liu.
"Okay, it's hard work, so, I will make arrangements for the evening, let's have a few drinks." Jiang Xiaobai said.
After coming out of the workshop, Jiang Xiaobai had a general understanding of the progress of the workshop.
He is the director of the factory, but not the director of the workshop. It is enough to understand these things.
His main job is to coordinate and grasp the general direction.
On the other side, Zhao Xinyi is working hard to learn from the waiter. Fortunately, the clothes in the flagship store have hang tags.
It is clear what the price is, otherwise, it will take a week to be familiar with the price of the clothes in the store.
That night, when Jiang Xiaobai returned to the flagship store after eating, he found that the light in Zhao Xinyi's room was still on.
Jiang Xiaobai thought for a while, and knocked on the door.
"Boom boom boom."
"Who?"
"Am I asleep?"
"No, come in." When Jiang Xiaobai pushed the door in, Zhao Xinyi's hair was still wet, and it was obvious that she had just washed her hair.
"You are drinking again, sit down, I will make you a cup of tea." Zhao Xinyi said.
"It's okay, you don't need to work, how about in the store? Are you still used to it?" Jiang Xiaobai asked.
"Very good, but tired. After standing here for a day, my legs hurt." Zhao Xinyi came over with a cup of tea and handed it to Jiang Xiaobai.
Then he took a towel and sat opposite Jiang Xiaobai, wiping his hair, and chatting with Jiang Xiaobai about the situation in the store today.
(End of this chapter)