After arranging the sheet metal made of the Silver meteorite san aside, Sam came out of the tower and immediately went to the Artisan tower to order something. He needs some items to use his gadget more efficiently and even though he can do this himself, he doesn't want to waste his time on these little things.

He is rich and if he can make others do his bidding on some minor things, why tire himself out.

So, Sam went to the Artisan tower and quickly placed the order on the things he needed and came back. But just when he was about to go upstairs, he saw, Watt walking towards him in a hurry.

"Boss, I did it." Watt said as soon as he came near him.

"What?" Sam didn't get what he meant immediately; he is still in zone. All he had in mind is his new gadget.

"I cut the leaf." Watt replied with excitement.

"Oh. Okay then let us go to yard." After saying that Sam led him into the Yard.

"Show me." He said as soon as he entered the yard as he pointed the only tree standing there. Watt took a dep breath and took out a small piece of tree bark from his pocket. The tree bark has a smooth surface and it might have been peeled of from a large tree. The shape and size of the tree bark are almost same as a playing card.

Watt immediately flicked the tree bark and it spun in the air as it flew towards the tree. A single leaf fell as the tree bark returned to Watt's hands. He controlled the wind to let the light weighted piece to come to him.

He looked at Sam, in anticipation. Even though he didn't use the same technique as Sam, he felt that his approach isn't wrong. After all, Sam himself said that all types of tricks can be used and achieving the goal is more important.

And as expected, Sam really nodded his head in satisfaction. "Good, your approach isn't wrong. But since you took an approach you shouldn't leave it halfway, try to master it as much as possible. There are almost two months to the admission in marquis academy, but I will be going there earlier and will be going in next fifteen days.

You have these fifteen days, to make improvements in your technique and use it in the most efficient way, if you can satisfy me, I will give you a gift, otherwise, you have to come to Marquis city along with the rest." Sam left these words and went back to his room.

He must finish his new project in this moment of inspiration only, this will be the best time to achieve maximum efficiency.

Sam went back to the second floor of the tower and took a piece of black wood in his hands. He started carving and made a small cylindrical wooden stick, then with another piece, he made another wooden stick, but the piece has larger diameter.

He cut the stick of large diameter along the length and made it into two equal halves. When making the mould this time he placed the lower half in separate box and the upper half in a separate moulding box which is placed on the first box. These two pieces are called Cope box and Drag box in the casting process.

There are two holes on the Cope box which is also the upper box.

Sam lifted the cope box carefully without disturbing the mould and placed the stick with a smaller diameter inside it.

After everything is done, he went back to the Cauldron and started melting the Black meteorite sand, After the metal is molten, he poured it into the newly made mould.

After a few hours, the casting is cooled down and when he opened the mould, a circular pipe is there. Even though this is not the most efficient way to make a pipe, Sam didn't have much of a choice.

Sam repeated the process for a the next few days, more than twenty days have passed as Sam manufactured each part slowly and steadily to make sure that the product is precise as he has a very high expectation over it.

Finally, Sam was done with the parts of frame and got ready to assemble it.

The frame initially is rectangular. Two long pipes of length 3 feet approximately and two pipes of one foot each. After welding the rectangular frame, he took out another pipe which fit perfectly between the two long pipes and welded it at the mid-point.

Next step, there are two rectangular rods which perfectly fit between the mid-point pipe and the end pipe. But this rectangular bar has a sphere in the mid-span which is connected with a joint which allows the sphere to rotate gyroscopically.

He welded the two bars on both sides of the mid-point pipe. Now the most major part of the frame is complete and the he has to place the Energy Cell holders and the extrusions for holding the sheet metal body over it.

Sam went back to work after making sure that major frame is perfect, he went back to work again.

The work this time is to bend and cut the sheet metal carefully and use the brazing technique to join them.

He took more than 70 days inside the tower to make it. He came out only one time to take the items from the Artisan tower.

Now, he is inside the tower, sitting with his product in his hands. The final step is the only thing that is left to finish it and that is to install the final set of energy cells.

He took the two energy cells which looked like the Hemispherical sections or simply bowls